Difference between revisions of "Departure checklist"

From MITNA
Jump to: navigation, search
 
Line 1: Line 1:
 
This is the checklist of things to do before getting underway.
 
This is the checklist of things to do before getting underway.
 +
 +
    * Retrieve key from starboard lazarette
 +
    * Remove companionway boards. Stow in starboard lazarette.
 +
    * Check recent log entries.
 +
    * Make log entry. Include at least the following:
 +
          o date and time
 +
          o name of each person on board
 +
    * Remove guppy. Stow guppy in bucket in starboard lazarette.
 +
    * Set battery switch to "House" (battery switch is on panel above galley sink)
 +
          o Verify that "F Pump" switch is "on" (in panel above galley sink)
 +
          o Verify that all other switches are "off" (in panel above galley sink)
 +
          o Verify that all switches are "off" (in panel to port above nav table)
 +
    * Check bilge water level and pump out if necessary.
 +
    * Check engine oil and coolant levels and top off if necessary.
 +
          o See detailed procedures in systems description
 +
    * Remove binnacle metal cover and stow.
 +
    * Give basic safety lecture for new sailors:
 +
          o life jackets
 +
          o fire extinguishers
 +
          o man overboard procedures
 +
          o VHF radio operation
 +
          o use of head (note that head is currently inoperative and placarded)
 +
          o avoiding the boom
 +
    * Start engine (see procedure elsewhere on Wiki)
 +
    * Configure electrical panels to desired operation, typically
 +
          o Navigation Instruments "on" (in panel above galley sink)
 +
          o FM Radio "on" (in panel above nav table, also energizes VHF radio)
 +
          o Navman "on" (in panel above nav table, energizes Garmin Chart Plotter)

Revision as of 20:56, 13 September 2011

This is the checklist of things to do before getting underway.

   * Retrieve key from starboard lazarette
   * Remove companionway boards. Stow in starboard lazarette.
   * Check recent log entries.
   * Make log entry. Include at least the following:
         o date and time
         o name of each person on board
   * Remove guppy. Stow guppy in bucket in starboard lazarette.
   * Set battery switch to "House" (battery switch is on panel above galley sink)
         o Verify that "F Pump" switch is "on" (in panel above galley sink)
         o Verify that all other switches are "off" (in panel above galley sink)
         o Verify that all switches are "off" (in panel to port above nav table)
   * Check bilge water level and pump out if necessary.
   * Check engine oil and coolant levels and top off if necessary.
         o See detailed procedures in systems description
   * Remove binnacle metal cover and stow.
   * Give basic safety lecture for new sailors:
         o life jackets
         o fire extinguishers
         o man overboard procedures
         o VHF radio operation
         o use of head (note that head is currently inoperative and placarded)
         o avoiding the boom 
   * Start engine (see procedure elsewhere on Wiki)
   * Configure electrical panels to desired operation, typically
         o Navigation Instruments "on" (in panel above galley sink)
         o FM Radio "on" (in panel above nav table, also energizes VHF radio)
         o Navman "on" (in panel above nav table, energizes Garmin Chart Plotter)