Difference between revisions of "Departure checklist"
From MITNA
| Line 9: | Line 9: | ||
* Remove guppy. Stow guppy in bucket in starboard lazarette. | * Remove guppy. Stow guppy in bucket in starboard lazarette. | ||
* Set battery switch to "House" (battery switch is on panel above galley sink) | * Set battery switch to "House" (battery switch is on panel above galley sink) | ||
| − | o Verify that "F Pump" switch is "on" (in panel above galley sink) | + | o Verify that the fuel lift pump "F Pump" switch is "on" (in panel above galley sink) |
o Verify that all other switches are "off" (in panel above galley sink) | o Verify that all other switches are "off" (in panel above galley sink) | ||
o Verify that all switches are "off" (in panel to port above nav table) | o Verify that all switches are "off" (in panel to port above nav table) | ||
Revision as of 20:34, 13 September 2011
This is the checklist of things to do before getting underway.
* Retrieve key from starboard lazarette
* Remove companionway boards. Stow in starboard lazarette.
* Check recent log entries.
* Make log entry. Include at least the following:
o date and time
o name of each person on board
* Remove guppy. Stow guppy in bucket in starboard lazarette.
* Set battery switch to "House" (battery switch is on panel above galley sink)
o Verify that the fuel lift pump "F Pump" switch is "on" (in panel above galley sink)
o Verify that all other switches are "off" (in panel above galley sink)
o Verify that all switches are "off" (in panel to port above nav table)
* Check bilge water level and pump out if necessary.
* Check engine oil and coolant levels and top off if necessary.
o See detailed procedures in systems description
* Remove binnacle metal cover and stow.
* Mount ensign on stern rail
* Hoist MITNA burgee
* Give basic safety lecture for new sailors:
o life jackets
o fire extinguishers
o man overboard procedures
o VHF radio operation
o use of head (note that head is currently inoperative and placarded)
o avoiding the boom
* Start engine (see procedure elsewhere on Wiki)
* Configure electrical panels to desired operation, typically
o Navigation Instruments "on" (in panel above galley sink)
o FM Radio "on" (in panel above nav table, also energizes VHF radio)
o Navman "on" (in panel above nav table, energizes Garmin Chart Plotter)