Difference between revisions of "Departure checklist"
From MITNA
m (Xdim depart checklist moved to Departure checklist) |
|
(No difference)
| |
Revision as of 08:43, 15 September 2011
This is the checklist of things to do before getting underway.
* Retrieve key from starboard lazarette
* Remove companionway boards. Stow in starboard lazarette.
* Check recent log entries.
* Make log entry. Include at least the following:
o date and time
o name of each person on board
* Remove guppy. Stow guppy in bucket in starboard lazarette.
* Set battery switch to "House" (battery switch is on panel above galley sink)
* Configure electrical panels to desired operation, typically
o Navigation Instruments "on" (in panel above galley sink)
o Verify that the fuel lift pump "F Pump" switch is "on" (in panel above galley sink)
o FM Radio "on" (in panel above nav table, also energizes VHF radio)
o Navman "on" (in panel above nav table, energizes Garmin Chart Plotter)
* Check bilge water level and pump out if necessary (switch above galley sink).
* Check engine oil and coolant levels and top off if necessary.
* Remove binnacle metal cover and stow.
* Mount ensign on stern rail
* Hoist MITNA burgee
* Give basic safety lecture for new sailors:
o life jackets
o fire extinguishers
o man overboard procedures
o VHF radio operation
o use of head (note that head is currently (09/14/2011)inoperative and placarded)
o avoiding the boom
o Winch operation and safety