Difference between revisions of "Return checklist"
From MITNA
(→Before leaving the boat) |
|||
(11 intermediate revisions by 4 users not shown) | |||
Line 1: | Line 1: | ||
== Before leaving the boat == | == Before leaving the boat == | ||
− | * | + | * On Deck |
− | ** | + | ** As needed, rinse the deck, brightwork, and metal with fresh water |
− | ** | + | ** Ensure that headsail is furled and secured, cover is hoisted, and jib sheets are tight |
− | ** | + | ** Replace cowl vents |
− | ** | + | ** Confirm the mooring line is on and tied off |
+ | ** Ensure the main halyard is attached to the deck fitting, not the head of the sail | ||
+ | ** Stow winch handles in little deck boxes | ||
+ | ** Ensure the engine key is off and removed | ||
+ | ** Lash the rudder | ||
+ | ** Tie a lateral line to the aft end of the boom to prevent it from swinging | ||
+ | ** Remove tension from the hydraulic backstay | ||
+ | ** Ensure all flags are stowed | ||
+ | ** Place and secure canvas covers on forward hatch, jib furling line hole, mainsail, cabin (including cushion), aft hatch, and backstay | ||
+ | |||
+ | |||
+ | * Below Deck | ||
+ | ** Check that the head is clean and empty | ||
+ | ** Confirm all hatches (3) and port lights (2) are closed and secured (at least with bungees) | ||
+ | ** Ensure the sink seacock is closed | ||
+ | ** Remove all trash from the boat | ||
+ | ** Sweep/wipe all cabin, kitchen, and cockpit surfaces as needed | ||
+ | ** Ensure all circuit breakers are off | ||
+ | |||
+ | |||
* Complete log entry, including: | * Complete log entry, including: | ||
− | ** | + | ** Date and time |
− | ** | + | ** Fuel level (push the black button on the engine panel) |
− | ** | + | ** Engine hours (digital display in the tachometer) |
− | ** | + | ** Name of person making the entry |
− | ** | + | ** Description of trip, including destination, route, weather |
− | ** | + | ** Anything else the next skipper should know (repairs needed, issues, etc.) |
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
− | + | ||
== For the dinghy before leaving the marina == | == For the dinghy before leaving the marina == | ||
Line 39: | Line 38: | ||
* freshwater rinse | * freshwater rinse | ||
* wipe salt residue from motor surfaces | * wipe salt residue from motor surfaces | ||
− | * | + | * Stow motorboat key in lockbox on dock |
− | + | ||
== After every few trips == | == After every few trips == | ||
Line 65: | Line 63: | ||
** wipe/scrub ceiling with simple green (diluted) | ** wipe/scrub ceiling with simple green (diluted) | ||
** wipe/scrub hatches and mast with simple green (diluted) to remove salt residue | ** wipe/scrub hatches and mast with simple green (diluted) to remove salt residue | ||
+ | * dinghy | ||
+ | ** scrub bottom of dinghy |
Latest revision as of 08:23, 7 September 2023
Before leaving the boat
- On Deck
- As needed, rinse the deck, brightwork, and metal with fresh water
- Ensure that headsail is furled and secured, cover is hoisted, and jib sheets are tight
- Replace cowl vents
- Confirm the mooring line is on and tied off
- Ensure the main halyard is attached to the deck fitting, not the head of the sail
- Stow winch handles in little deck boxes
- Ensure the engine key is off and removed
- Lash the rudder
- Tie a lateral line to the aft end of the boom to prevent it from swinging
- Remove tension from the hydraulic backstay
- Ensure all flags are stowed
- Place and secure canvas covers on forward hatch, jib furling line hole, mainsail, cabin (including cushion), aft hatch, and backstay
- Below Deck
- Check that the head is clean and empty
- Confirm all hatches (3) and port lights (2) are closed and secured (at least with bungees)
- Ensure the sink seacock is closed
- Remove all trash from the boat
- Sweep/wipe all cabin, kitchen, and cockpit surfaces as needed
- Ensure all circuit breakers are off
- Complete log entry, including:
- Date and time
- Fuel level (push the black button on the engine panel)
- Engine hours (digital display in the tachometer)
- Name of person making the entry
- Description of trip, including destination, route, weather
- Anything else the next skipper should know (repairs needed, issues, etc.)
For the dinghy before leaving the marina
- scrub floor
- freshwater rinse
- wipe salt residue from motor surfaces
- Stow motorboat key in lockbox on dock
After every few trips
- deck
- scrub the decks
- remove scuff marks from transom and aft hull
- freshwater rinse exterior above the waterline
- flush soot and dirt from toe rails
- head
- drain holding tank then flush it a few times
- scrub/wipe all surfaces
- clean drain pan and grid
- bilge
- scrub with brushes and rinse
- clean bilge well of any particles
- remove all slime and debris from pump strainers
- kitchen
- clean stove and oven
- clean sinks
- clean countertops
- main cabin
- wipe/scrub all wood surfaces with murphy's wood soap (diluted)
- wipe/scrub ceiling with simple green (diluted)
- wipe/scrub hatches and mast with simple green (diluted) to remove salt residue
- dinghy
- scrub bottom of dinghy