Difference between revisions of "Engine zincs replace 2007"

From MITNA
Jump to: navigation, search
(describe 6 pics of pencil zincs)
m (minor reformat, start new words)
Line 1: Line 1:
[[Image:Zincs-4 old dec06-6x9 96p.gif|right|Old Zincs Removed 2007]]
+
There are two pencil zincs on Nevermore's engine. Both are shown in the
 
+
[[Image:Zincs-2 new dec07-7x4 72p.gif|right|Two New Zincs]]
+
  
  
 +
[[Image:Zincs-4 old dec06-6x9 96p.gif|right|Old Zincs Removed 2007]]
 +
 +
<!-- let's put some spacers in to push the A,B,C,D texts  -->
 +
<!-- somewhat beside the three figures being talked about  -->
 +
 +
 +
 +
<!-- vertical spacer (left-side of page  -->
 +
 
:A: Old pencil zinc removed from the heat exchanger  (the heat exchanger moves sea water over cooling tubes which have circulating fresh water, which in turn cools the engine.)
 
:A: Old pencil zinc removed from the heat exchanger  (the heat exchanger moves sea water over cooling tubes which have circulating fresh water, which in turn cools the engine.)
 
:: The little chunk was found inside the heat exchanger, along with several very small (like sand) pieces of zinc (and/or possibly actual sand?)  
 
:: The little chunk was found inside the heat exchanger, along with several very small (like sand) pieces of zinc (and/or possibly actual sand?)  
 +
 +
<!-- vertical spacer (left-side of page  -->
 +
 +
 +
<!-- vertical spacer (left-side of page  -->
  
 
:B: New pencil zinc installed Fall '07; we found two of these aboard Nevermore in the box of new spare parts.
 
:B: New pencil zinc installed Fall '07; we found two of these aboard Nevermore in the box of new spare parts.
 +
 +
<!-- vertical spacer (left-side of page  -->
 +
 +
 
 +
 +
 +
 +
 +
 +
 +
<!-- vertical spacer (left-side of page  -->
  
 
:C: Old pencil zinc removed from the oil cooler (the oil cooler moves sea water over cooling tubes which have circulating engine oil, the same oil used to lubricate and cool the engine.)
 
:C: Old pencil zinc removed from the oil cooler (the oil cooler moves sea water over cooling tubes which have circulating engine oil, the same oil used to lubricate and cool the engine.)
 +
 +
<!-- vertical spacer (left-side of page  -->
 +
 +
 +
 +
 +
 +
 +
 +
<!-- vertical spacer (left-side of page  -->
  
 
:D: Old pencil zinc found aboard Nevermore; it's the same size as (B), so we assume it was removed by previous owner, but at unknown (to us) time.
 
:D: Old pencil zinc found aboard Nevermore; it's the same size as (B), so we assume it was removed by previous owner, but at unknown (to us) time.
 +
 +
 +
[[Image:Zincs-2 new dec07-7x4 72p.gif|right|Two New Zincs]]
 +
 +
<!-- vertical spacer (left-side of page  -->
 +
<!-- vertical spacer (left-side of page  -->
  
 
:E: New pencil zinc we bought, ready to be installed in the oil cooler (Jan08); we had to cut down its length (we discuss this below, but note that its zinc is longer than the heat exchanger zinc, whereas the oil cooler is smaller diameter than the heat exchanger.)
 
:E: New pencil zinc we bought, ready to be installed in the oil cooler (Jan08); we had to cut down its length (we discuss this below, but note that its zinc is longer than the heat exchanger zinc, whereas the oil cooler is smaller diameter than the heat exchanger.)
 +
 +
<!-- vertical spacer (left-side of page  -->
 +
 +
 +
<!-- vertical spacer (left-side of page  -->
  
 
:F: Another new pencil zinc for the heat exchanger, presented here to show the different size of item E zinc.  We bought it (West Marine) to compare to the units we found aboard (see item B.)
 
:F: Another new pencil zinc for the heat exchanger, presented here to show the different size of item E zinc.  We bought it (West Marine) to compare to the units we found aboard (see item B.)

Revision as of 23:24, 29 January 2008

There are two pencil zincs on Nevermore's engine. Both are shown in the


Old Zincs Removed 2007



A: Old pencil zinc removed from the heat exchanger (the heat exchanger moves sea water over cooling tubes which have circulating fresh water, which in turn cools the engine.)
The little chunk was found inside the heat exchanger, along with several very small (like sand) pieces of zinc (and/or possibly actual sand?)



B: New pencil zinc installed Fall '07; we found two of these aboard Nevermore in the box of new spare parts.






C: Old pencil zinc removed from the oil cooler (the oil cooler moves sea water over cooling tubes which have circulating engine oil, the same oil used to lubricate and cool the engine.)





D: Old pencil zinc found aboard Nevermore; it's the same size as (B), so we assume it was removed by previous owner, but at unknown (to us) time.


Two New Zincs


E: New pencil zinc we bought, ready to be installed in the oil cooler (Jan08); we had to cut down its length (we discuss this below, but note that its zinc is longer than the heat exchanger zinc, whereas the oil cooler is smaller diameter than the heat exchanger.)



F: Another new pencil zinc for the heat exchanger, presented here to show the different size of item E zinc. We bought it (West Marine) to compare to the units we found aboard (see item B.)