Return checklist

This is the checklist of things to do before leaving the boat.

   * Remove ensign from stern and stow.
   * Remove MITNA burgee and stow.
   * Stow winch handles in tray in starboard lazarette
   * Stow boat hook in starboard lazarette.
   * Replace metal binnacle cover if removed.
   * Ensure that mainsail is well-tied and covered.
   * Ensure that headsail is furled and secured, and jib sheets are tight.
   * Ensure that main halyard is attached to aft end of boom and boom is held level.
   * Ensure that the boom and sailcover will not touch the dodger.
   * Close hatches (there are 3) and window ports (there is 1).
   ***IMPORTANT***
   * Tidy up
         o wipe kitchen surfaces
         o sweep/wipe cabin floor
         o sweep/wipe cockpit surfaces
         o wash/scrub topsides with freshwater 
   * Complete log entry, including:
         o date and time
         o estimated engine hours and fuel level (use mechanical gauge underneath port salon bunk cushion)
         o name of person making the entry
         o description of trip, including destination, route, weather
         o enumeration of things that were repaired, need to be repaired, will soon need to be repaired 
   * Stow cockpit cushions on edge in cabin.
   * Ensure that stove switch and propane tank valve is closed.
   * Ensure that bilge pump switch is in 'automatic' position (down).
   * Set all electrical switches to 'off'.
   * Set battery switch to 'off'.
   * Install companionway boards.
   * Tighten steering brake with rudder in centered position.
   * Deploy the guppy, clamp to backstay
   * Lock cabin and place key in its proper position in the starboard lazarette.