Difference between revisions of "Nevermore Task List"

From MITNA
Jump to: navigation, search
Line 3: Line 3:
  
  
- outfit dinghy (boat, boards, motor) (sporter)
+
* outfit dinghy (boat, boards, motor) (sporter)
  
- put line on steering wheel (mwall)
+
* put line on steering wheel (mwall)
  
- install new shroud protection (mwall)
+
* install new shroud protection (mwall)
  
- replace mast light (mwall, asilveira)
+
* replace mast light (mwall, asilveira)
  
- replace traveller line (mwall)
+
* replace traveller line (mwall)
  
- make new cushion covers (mwisheart)
+
* make new cushion covers (mwisheart)
  
- procure new screens (mwisheart)
+
* procure new screens (mwisheart)
  
- documentation (samajane)
+
* documentation (samajane)
 +
** ongoing
  
- install new bilge pump switch (tyoung)
+
* install new bilge pump switch (tyoung)
 +
** Franny said he'd order it
  
- diagnose and document electrical system (tspettel & tyoung)
+
* diagnose and document electrical system (tspettel & tyoung)
 +
** ongoing
  
- procure new emergency and first-aid kit (asilveira)
+
* procure new emergency and first-aid kit (asilveira)
  
- procure life jackets (asilveira)
+
* procure life jackets (asilveira)
  
- arrange for out-of-water winter storage (fcharles)
+
* arrange for out-of-water winter storage (fcharles)
  
- inventory what is on boat (samajane)
+
* inventory what is on boat (samajane)
  
- clean inside all drawers and cabinets (samajane)
+
* clean inside all drawers and cabinets (samajane)
 +
** ongoing, see below
  
- wipe all wood surfaces with murphy's soap (mwall)
+
* wipe all wood surfaces with murphy's soap (mwall)
 +
** ongoing, see below
  
- procure engine coolant (sporter)
+
* procure engine coolant (sporter)
  
- change oil and coolant (sporter)
+
* change oil and coolant (sporter)
  
- clean kitchen again/more (samajane)
+
* clean kitchen again/more (samajane)
 +
** ongoing see below
  
- sand down to fit, & revarnish, 3 saloon sole hatches: 2 sanded & fit (tspettel)  
+
* sand down to fit, & revarnish, 3 saloon sole hatches: 2 sanded & fit (tspettel)  
  
- repair faulty tachometer (tyoung)
+
* remove stove hoses and replace with new hoses (tyoung)
  
Remaining "Cleaning" Tasks
+
=== Remaining "Cleaning" Tasks ===
  
----
+
* main cabin
main cabin
+
** scrub all wood surfaces with murphy's wood soap (diluted)
- scrub all wood surfaces with murphy's wood soap (diluted)
+
** scrub ceiling of main cabin
- scrub ceiling of main cabin
+
  
 +
* starboard lazarette
 +
** remove everything from lazarette then scrub it (use brushes), then put everything back when the lazarette has dried out
  
- starboard lazarette
+
* aft lazarette
- remove everything from lazarette then scrub it (use brushes),
+
** remove everything from lazaretted (including wood panels) then scrub the hull and wood panels
    then put everything back when the lazarette has dried out
+
  
- aft lazarette
+
* head
- remove everything from lazaretted (including wood panels)
+
** remove everything from cupboards and scrub them out
    then scrub the hull and wood panels
+
** scrub all surfaces in the head
 +
** holding tank needs to be drained then flushed a few times
 +
** scrub the hull under the sink.  beware of the outbound thru-hull fitting - it leaks already and we do not want to sink the boat    by knocking it off or exacerbating the leak.
  
- freshwater tanks
+
* bilge
- scrub inside of port and starboard freshwater tanks.  do not
+
** after everything else has been cleaned, the bilge needs to be scrubbed with brushes and flushed numerous times
    use any cleaners - just reach in with a clean scotchbright
+
    sponge and scrub off all of the mildew and mold.  then drain
+
    the tanks.  we will have to replace the freshwater hoses
+
    throughout the boat - they are too gunked up to salvage.
+
  
1 ROUND DONE (samajane/tyoung) see WATER TANKS [http://sailing.mit.edu/mediawiki/index.php?title=Talk:Maintenance_Cleanup_task_list&action=edit discussion]
 
  
  
- head
 
- remove everything from cupboards and scrub them out
 
- scrub all surfaces in the head
 
- holding tank needs to be drained then flushed a few times
 
- scrub the hull under the sink.  beware of the outbound thru-hull
 
    fitting - it leaks already and we do not want to sink the boat
 
    by knocking it off or exacerbating the leak.
 
  
- bilge
+
== Tasks unclaimed: ==
- after everything else has been cleaned, the bilge needs to be
+
    scrubbed with brushes and flushed numerous times
+
  
  
  
 +
* clean interior
  
== Tasks unclaimed: ==
+
* clean inner surface of hull
  
 +
* clean bilge and everything in it (especially filters)
  
 +
* install new freshwater manual pump
  
- clean interior
+
* install new freshwater hoses
  
- clean inner surface of hull
+
* clean head
  
- clean bilge and everything in it (especially filters)
+
* replace faulty head seals
  
- install new freshwater manual pump
+
* replace faulty head hoses
  
- clean freshwater tanks
+
* install led lighting (this may need some explanation)
  
- install new freshwater hoses
+
* purge holding tank
  
- clean head
+
* de-scale mast (in cabin)
  
- replace faulty head seals
+
* tune rigging
  
- replace faulty head hoses
+
* tighten lifelines
  
- install led lighting
+
* lubricate turnbuckles
  
- purge holding tank
+
* replace sad ringdings
  
- de-scale mast (in cabin)
+
* secure nav light wiring in anchor compartment
  
- tune rigging
+
* install speedometer (The speedometer has disappeared)
  
- tighten lifelines
+
* fix wind indicator
  
- lubricate turnbuckles
+
* wiring needs to be tidied up, specifically raised to be further from water levels
  
- replace sad ringdings
+
* copper grounding wire needs to be replaced (bow to stern)
  
- secure nav light wiring in anchor compartment
+
* diagnose and tune depth indicator and sensor (dive under boat to clean?)
  
- install speedometer
+
* diagnose, tune, and document 12v system
  
- fix wind indicator
+
* diagnose, tune, and document 110v system
  
- wiring needs to be tidied up, specifically raised to be further
+
* diagnose, tune, and document radar/chartplotter system
    from water levels
+
- copper grounding wire needs to be replaced (bow to stern)
+
  
- diagnose and tune depth indicator and sensor (dive under boat to
+
* diagnose/change engine oil and oil filter
clean?)
+
  
- diagnose, tune, and document 12v system
+
* replace manual bilge pump (handle socket is fractured)
  
- diagnose, tune, and document 110v system
+
* install capture wires on anchor retention pin(s)
  
- diagnose, tune, and document radar/chartplotter system
+
* purge stove fuel tank, clean, and reinstall
  
- diagnose/change engine oil and oil filter
+
* clean/tune stove and oven  (the surface of the stove has been cleaned)
  
- replace manual bilge pump (handle socket is fractured)
+
== Tasks completed: ==
  
- install capture wires on anchor retention pin(s)
+
* get boat to boston :) (mlindblad, fcharles, asilveira, rcleary, smgarrel, mwall)
  
- remove stove hoses and replace with new hoses
+
* remove unused stuff from boat (asilveira, rcleary, mwall)
  
- purge stove fuel tank, clean, and reinstall
+
* clean kitchen equipment (asilveira)
  
- clean/tune stove and oven  (the surface of the stove has been cleaned)
+
* procure freshwater pumps (rcleary)
 
+
== Tasks completed: ==
+
  
- get boat to boston :) (mlindblad, fcharles, asilveira, rcleary,
+
* install freshwater pump (tyoung)
smgarrel, mwall)
+
  
- remove unused stuff from boat (asilveira, rcleary, mwall)
+
* lubricate door fittings (mwall)
  
- clean kitchen equipment (asilveira)
+
* clean curtains (asilveira)
  
- procure freshwater pumps (rcleary)
+
* 12v batteries and switches documented (tspettel)
  
- install freshwater pump (tyoung)
+
* repair bilge pump and move to stern lazarette (tyoung)
  
- lubricate door fittings (mwall)
+
* diagnose engine instruments (tspettel & tyoung)
  
- clean curtains (asilveira)
+
* scrub inside of port cabin bench DONE (samajane/lfortmiller)
  
- 12v batteries and switches documented (tspettel)
+
* scrub inside of port nav station compartment (beneath and to the left of the nav table) DONE (samajane)
  
- repair bilge pump and move to stern lazarette (tyoung)
+
* scrub inner hull surfaces and vertical surfaces in the    clothing cabinets (located near the head) (samajane/lfortmiller)
  
- diagnose engine instruments (tspettel & tyoung)
+
* repair faulty tachometer (tyoung)
  
- scrub inside of port cabin bench DONE (samajane/lfortmiller)
+
* scrub inside of freshwater tanks (samajane/tyoung)
- scrub inside of port nav station compartment (beneath and
+
    to the left of the nav table) DONE (samajane)
+
- scrub inner hull surfaces and vertical surfaces in the
+
    clothing cabinets (located near the head) (samajane/lfortmiller)
+

Revision as of 10:46, 16 September 2007

Tasks with a point person:

  • outfit dinghy (boat, boards, motor) (sporter)
  • put line on steering wheel (mwall)
  • install new shroud protection (mwall)
  • replace mast light (mwall, asilveira)
  • replace traveller line (mwall)
  • make new cushion covers (mwisheart)
  • procure new screens (mwisheart)
  • documentation (samajane)
    • ongoing
  • install new bilge pump switch (tyoung)
    • Franny said he'd order it
  • diagnose and document electrical system (tspettel & tyoung)
    • ongoing
  • procure new emergency and first-aid kit (asilveira)
  • procure life jackets (asilveira)
  • arrange for out-of-water winter storage (fcharles)
  • inventory what is on boat (samajane)
  • clean inside all drawers and cabinets (samajane)
    • ongoing, see below
  • wipe all wood surfaces with murphy's soap (mwall)
    • ongoing, see below
  • procure engine coolant (sporter)
  • change oil and coolant (sporter)
  • clean kitchen again/more (samajane)
    • ongoing see below
  • sand down to fit, & revarnish, 3 saloon sole hatches: 2 sanded & fit (tspettel)
  • remove stove hoses and replace with new hoses (tyoung)

Remaining "Cleaning" Tasks

  • main cabin
    • scrub all wood surfaces with murphy's wood soap (diluted)
    • scrub ceiling of main cabin
  • starboard lazarette
    • remove everything from lazarette then scrub it (use brushes), then put everything back when the lazarette has dried out
  • aft lazarette
    • remove everything from lazaretted (including wood panels) then scrub the hull and wood panels
  • head
    • remove everything from cupboards and scrub them out
    • scrub all surfaces in the head
    • holding tank needs to be drained then flushed a few times
    • scrub the hull under the sink. beware of the outbound thru-hull fitting - it leaks already and we do not want to sink the boat by knocking it off or exacerbating the leak.
  • bilge
    • after everything else has been cleaned, the bilge needs to be scrubbed with brushes and flushed numerous times



Tasks unclaimed:

  • clean interior
  • clean inner surface of hull
  • clean bilge and everything in it (especially filters)
  • install new freshwater manual pump
  • install new freshwater hoses
  • clean head
  • replace faulty head seals
  • replace faulty head hoses
  • install led lighting (this may need some explanation)
  • purge holding tank
  • de-scale mast (in cabin)
  • tune rigging
  • tighten lifelines
  • lubricate turnbuckles
  • replace sad ringdings
  • secure nav light wiring in anchor compartment
  • install speedometer (The speedometer has disappeared)
  • fix wind indicator
  • wiring needs to be tidied up, specifically raised to be further from water levels
  • copper grounding wire needs to be replaced (bow to stern)
  • diagnose and tune depth indicator and sensor (dive under boat to clean?)
  • diagnose, tune, and document 12v system
  • diagnose, tune, and document 110v system
  • diagnose, tune, and document radar/chartplotter system
  • diagnose/change engine oil and oil filter
  • replace manual bilge pump (handle socket is fractured)
  • install capture wires on anchor retention pin(s)
  • purge stove fuel tank, clean, and reinstall
  • clean/tune stove and oven (the surface of the stove has been cleaned)

Tasks completed:

  • get boat to boston :) (mlindblad, fcharles, asilveira, rcleary, smgarrel, mwall)
  • remove unused stuff from boat (asilveira, rcleary, mwall)
  • clean kitchen equipment (asilveira)
  • procure freshwater pumps (rcleary)
  • install freshwater pump (tyoung)
  • lubricate door fittings (mwall)
  • clean curtains (asilveira)
  • 12v batteries and switches documented (tspettel)
  • repair bilge pump and move to stern lazarette (tyoung)
  • diagnose engine instruments (tspettel & tyoung)
  • scrub inside of port cabin bench DONE (samajane/lfortmiller)
  • scrub inside of port nav station compartment (beneath and to the left of the nav table) DONE (samajane)
  • scrub inner hull surfaces and vertical surfaces in the clothing cabinets (located near the head) (samajane/lfortmiller)
  • repair faulty tachometer (tyoung)
  • scrub inside of freshwater tanks (samajane/tyoung)