Difference between revisions of "Shopping List"

Revision as of 21:03, 29 March 2013

Please add here parts and supplies that are needed for the boat.

needed

• socket head cap screw for roller furler - 5/16"-32 5/8" long
• pen holder for nav station
• window gasket - fuller brush company; 12 3/8 x 5 1/4 gasket; 13.5 x 6.5 approx cutout
• 2 collapsible oars for dinghy, with oar locks
• 50' 5/8" spring line (green? not gold/white)
• adhesive for lazarette gaskets
• 12v vacuum
• 1/8" diameter bolt, 1 1/4" shank for pulpit shear pin
• 3 inclination indicators
• 4 hooks for anchor rodes and tackle
• 2 hooks for gaffing hooks
• 4 dodger track end caps (1" wide track, 1/4" thick?)
• 4 or 5 misc 10' to 20' lines from pavilion
• ditch bag
• hydraulic wire cutter for shrouds
• 6 tethers (recommended: two-clip tethers w/ one short leg, one long leg w/ elastic)
• drogue
• storm jib
• trysail track 7/8" 16'?
• fire blanket for stove
• stainless bar stock for cubby retainers
• 26' 2" bilge hose (two 13' segments is ok)
• 2.25" bronze T fitting
• reducer 2.25" to 2"
• 12 2" to 2.5" stainless hose clamps
• 6 large padeyes for tethers
• fog horn (lung powered)
• companionway latch (TPI #10303, #18005)
• padlock for companionway

• block and shackle for spinnaker halyard
• 2 cheek blocks
• red reef line
• yellow reef line
• second spinakker halyard
• trysail halyard
• trysail sheets
• storm jib sheets

• new lifelines

• stuff bags for jacklines
• 2x50' jack line webbing
• waterproof flashlights
• cockpit knife

• small bottle of wd40
• small bottle of light oil

• 2 2.5 gallon plastic/rubber buckets with 15' tethers
• 10 or 12 smaller storage bins 15" x 4"
• large freezer ziploc bags
• hot pads or oven mitts
• 2 cutting boards - medium and small
• small portable bike pump

• bottom paint black 2 gallons
• detco propspeed antifoul paint for propeller

from pavilion

• simple green
• acetone
• epoxy

in progress

• steering cables - oysterbay
• baby stay - 50" pin-to-pin, 1/4" wire - oysterbay
• hatch lens - 25 3/8 x 25 3/8 x 1/2 - j freeman 800.282.1150
• hatch lens - 13 1/8 x 18 1/4 x 3/8 - j freeman
• windows - 27 x 5 x 3/8 - j freeman

completed

• 27mar13 float switch
• 27mar13 3 tubes white life caulk
• 27mar13 racor filters
• 27mar13 hacksaw and 6 blades
• 27mar13 12v spotlight (recommended: Streamlight Waypoint)
• 27mar13 12 storage bins shoebox size
• 27mar13 50' heaving line
• 27mar13 75' heaving line
• 27mar13 springs and pawls for winches
• 27mar13 bronze T fittings and nipples for cockpit scuppers (1.5")
• 27mar13 2 prop zincs (1.25")
• 27mar13 man overboard strobelight
• 27mar13 man overboard float/flag
• 16mar13 100' garden hose
• 16mar13 needle nose pliers
• 16mar13 small vise grips
• 16mar13 2 led lamps
• 12nov12 500' of nylon cord for mast halyards
• 12nov12 12 gallons poly glycol for freshwater and engine seawater systems
•  ??sep12 cover for dinghy outboard - 5hp mercury circa 2005
•  ??sep12 solenoid (pending inspection/refurb of previous)
•  ??aug12 swim ladder fender step
• 11jul12 2 2" exhaust clamps
• 11jul12 3" blower hose, 20 feet
• 06jul12 boom vang tube - 3/8" pin, 70" pin-to-pin, C-series
• 03jul12 traveller sheets - 3/8" 2x20'
• 03jul12 freshwater fill hose - 1.5" diam, 46" long
• 03jul12 non-skid black strips
• 03jul12 white life caulk, 2 tubes
• 03jul12 black life caulk, 2 tubes
• 03jul12 3 small parts trays (home depot)
• 02jul12 set of drill bits
• 02jul12 garden hose
• 02jul12 winch handle pocket to be mounted on mast
• 02jul12 large fender
• 01jul12 freshwater overflow hose - 1.5" diam, 76" long - leftover from bilge hoses
• 01jul12 dust brush and pan
• 01jul12 scissors
• 01jul12 large vise grips
• 29jun12 in-line blower 3" - squirrel cage not inline
• 29jun12 2 3/16"D 1.5" long fastpins for hatch locks
• 29jun12 5 stand-up springs for halyard blocks
• 29jun12 mast boot
• 29jun12 steel bands for exhaust tape
• 29jun12 large hose clamp
• 29jul12 small gasoline can for dinghy refueling, keep in dock box
• 29jul12 two-stroke oil for dinghy outboard
• 28jun12 5 halyard blocks for 1/2" line (main, 2 spin, 2 jib) - ordered 5 3" harken blocks 26jun12
• 28jun12 2 blocks for 1/2" line (main sheet) - ordered 2 2 1/4" harken blocks 26jun12
• 26jun12 snap shackles for dinghy tie-ups
• 26jun12 1 small waste bin for head
• 26jun12 jib sheets for racing jib: 2x 3/4" line, 40 feet - deferred
• 26jun12 boom vang tackle: 352131 (Harken 8:1 Tackle YR-XL), West Marine part no. 7358880 - ordered 15jun12
• 26jun12 traveler car: harken T3242B.HL - ordered 15jun12
• 22jun12 gasket material for raw water strainer - perko
• 22jun12 stainless mesh for raw water strainer - perko approx 6" tall, 1 1/4" in/out pipes
• 17jun12 large anchor/rode bag
• 17jun12 2 large hose clamps for mast boot - 25 3/4" and 43"
• 17jun12 wood dowels - 3/4" diameter and 1 1/8" diameter to plug toerail holes
• 17jun12 hooks for line stowage in stbd v-berth bin
• 17jun12 3 cheek blocks for 1/2" line (main halyard, main sheet)
• 17jun12 two boat hooks
• 16jun12 mast boot kit
• 16jun12 2 rolls oil blotter
• 16jun12 holding tank treatment 4 bottles
• 16jun12 large fender to replace uninflatable deflated one
• 16jun12 8 1.5" high quality hose clamps for scupper T fittings
• 13jun12 binder for manuals - keith has it, will deliver to boat 07apr12
• 12jun12 fiberglass insulation for exhaust riser
• 12jun12 blower exhaust vent
• 12jun12 coolant: ethylene glycol with sodium nitrate/benzoate, 2 gallons
• 12jun12 oil: 15W40, 5 quarts
• 12jun12 45 degree 1.25" elbow bronze for seawater in
• 12jun12 nuts and lockwashers for exhaust riser
• 11jun12 two oil hoses
• 20may12 1" to 1.25" bronze coupling (via threaded reducer)
• 19may12 starter motor - deliver to wally for rebuild 11may12
• 19may12 transducer paint
• 19may12 replacement screws for prop shaft coupling - will use old ones
• 17may12 30 stainless screws oval head phillips #12 3" long
• 16may12 traveler end controls
• 13may12 stainless cotter pin sets
• 13may12 stainless hinge for top cabin/engine step
• 13may12 lock washers for engine bracket 3/8"
• 13may12 stainless screws for engine mount 3/8", 1.5" long
• 13may12 exhaust thru-hull
• 13may12 engine seawater in hose
• 13may12 bronze fittings for engine seawater in
• 13may12 prop paint
• 10may12 bottom paint - 3 gallons black - at pavilion
• 08may12 exhaust riser for perkins engine - ready to install 01apr12
• 08may12 engine bracket and engine mount - ordered by wally foster ??mar12
• 22apr12 gojo hand cleaner
• 22apr12 bleach
• 22apr12 simple green
• 22apr12 dust masks
• 22apr12 misc electrical parts (wire, breakers, lamp fixtures)
• 22apr12 misc hoses and fittings for cockpit scuppers
• 22apr12 parts trays for fasteners
•  ??apr12 hose for large manual pump
• 22apr12 fitting for exhaust thru-hull 1-3/4" thread to 2-3/8" barbed/smooth
• 01apr12 Y connector for 1-1/8" hose - ordered 01apr12 from jamestown
•  ??apr12 JABSCO 29290-1000 strum box for 1" hose
• 01apr12 whale gusher 10 rebuild kit
• 01apr12 1" antisiphon loop (seawater in to engine)
• 01apr12 10' engine stop cable plus hardware
• 01apr12 6" length of 2" ID hose - on boat
• 01apr12 Ultra Safety Systems Ultimate Mini float switch - on boat
• 01apr12 bandaids - on boat
• 01apr12 large and small wire ties - on boat
• 01apr12 large and small nylon wire clamps - on boat
• 01apr12 propane regulator - on boat
•  ??mar12 sponges - package of 6 on boat