Difference between revisions of "Shopping List"

From MITNA
Jump to: navigation, search
(needed)
 
(62 intermediate revisions by 4 users not shown)
Line 3: Line 3:
 
==needed==
 
==needed==
  
* socket head cap screw for roller furler - 5/16"-32 5/8" long
+
* 3x O-rings for dorade vent covers
* pen holder for nav station
+
* 3" diameter dorade vent x2
* window gasket - fuller brush company; 12 3/8 x 5 1/4 gasket; 13.5 x 6.5 approx cutout
+
* Welding glove for emergency flares
* 2 collapsible oars for dinghy, with oar locks
+
* Eye strap for lee cloth: https://pro.westmarine.com/sea-dog-brass-eye-strap-257618.html or https://www.jamestowndistributors.com/product/product-detail/63333
* 50' 5/8" spring line (green?  not gold/white)
+
* 2x MOB AIS units: https://pro.westmarine.com/ocean-signal-rescueme-mob1-ais-dsc-personal-locator-beacon-16749251.html
* adhesive for lazarette gaskets
+
* 12v vacuum
+
* 1/8" diameter bolt, 1 1/4" shank for pulpit shear pin
+
* 3 inclination indicators
+
* 4 hooks for anchor rodes and tackle
+
* 2 hooks for gaffing hooks
+
* 4 dodger track end caps (1" wide track, 1/4" thick?)
+
* 4 or 5 misc 10' to 20' lines from pavilion
+
* ditch bag
+
* hydraulic wire cutter for shrouds
+
* 6 tethers (recommended: two-clip tethers w/ one short leg, one long leg w/ elastic)
+
* drogue
+
* storm jib
+
* trysail track 7/8" 16'?
+
* fire blanket for stove
+
* stainless bar stock for cubby retainers
+
* 26' 2" bilge hose (two 13' segments is ok)
+
* 2.25" bronze T fitting
+
* reducer 2.25" to 2"
+
* 12 2" to 2.5" stainless hose clamps
+
* 6 large padeyes for tethers
+
* fog horn (lung powered)
+
  
* block and shackle for spinnaker halyard
+
* Hand sanitizer for onboard use
* 2 cheek blocks
+
* 8 wood hangers for the foulies
* red reef line
+
* A metric socket set for onboard tasks (e.g. engine work)
* yellow reef line
+
* 2 x safety glasses for the tool kit
* second spinakker halyard
+
* trysail halyard
+
* trysail sheets
+
* storm jib sheets
+
 
+
* new lifelines
+
 
+
* stuff bags for jacklines
+
* 2x50' jack line webbing
+
* waterproof flashlights
+
* cockpit knife
+
 
+
* small bottle of wd40
+
* small bottle of light oil
+
 
+
* 2 2.5 gallon plastic/rubber buckets with 15' tethers
+
* 10 or 12 smaller storage bins 15" x 4"
+
* large freezer ziploc bags
+
* hot pads or oven mitts
+
* 2 cutting boards - medium and small
+
* small portable bike pump
+
* posterboard for panel templates
+
 
+
* bottom paint black 2 gallons
+
  
 
==from pavilion==
 
==from pavilion==
 
* simple green
 
* acetone
 
* epoxy
 
  
 
==in progress==
 
==in progress==
 
* steering cables - oysterbay
 
* baby stay - 50" pin-to-pin, 1/4" wire - oysterbay
 
* hatch lens - 25 3/8 x 25 3/8 x 1/2 - j freeman 800.282.1150
 
* hatch lens - 13 1/8 x 18 1/4 x 3/8 - j freeman
 
* windows - 27 x 5 x 3/8 - j freeman
 
  
 
==completed==
 
==completed==
 
* 27mar13 float switch
 
* 27mar13 3 tubes white life caulk
 
* 27mar13 racor filters
 
* 27mar13 hacksaw and 6 blades
 
* 27mar13 12v spotlight (recommended: Streamlight Waypoint)
 
* 27mar13 12 storage bins shoebox size
 
* 27mar13 50' heaving line
 
* 27mar13 75' heaving line
 
* 27mar13 springs and pawls for winches
 
* 27mar13 bronze T fittings and nipples for cockpit scuppers (1.5")
 
* 27mar13 2 prop zincs (1.25")
 
* 27mar13 man overboard strobelight
 
* 27mar13 man overboard float/flag
 
* 16mar13 100' garden hose
 
* 16mar13 needle nose pliers
 
* 16mar13 small vise grips
 
* 16mar13 2 led lamps
 
* 12nov12 500' of nylon cord for mast halyards
 
* 12nov12 12 gallons poly glycol for freshwater and engine seawater systems
 
* ??sep12 cover for dinghy outboard - 5hp mercury circa 2005
 
* ??sep12 solenoid (pending inspection/refurb of previous)
 
* ??aug12 <s>swim ladder</s> fender step
 
* 11jul12 2 2" exhaust clamps
 
* 11jul12 3" blower hose, 20 feet
 
* 06jul12 boom vang tube - 3/8" pin, 70" pin-to-pin, C-series
 
* 03jul12 traveller sheets - 3/8" 2x20'
 
* 03jul12 freshwater fill hose - 1.5" diam, 46" long
 
* 03jul12 non-skid black strips
 
* 03jul12 white life caulk, 2 tubes
 
* 03jul12 black life caulk, 2 tubes
 
* 03jul12 3 small parts trays (home depot)
 
* 02jul12 set of drill bits
 
* 02jul12 garden hose
 
* 02jul12 winch handle pocket to be mounted on mast
 
* 02jul12 large fender
 
* 01jul12 freshwater overflow hose - 1.5" diam, 76" long - leftover from bilge hoses
 
* 01jul12 dust brush and pan
 
* 01jul12 scissors
 
* 01jul12 large vise grips
 
* 29jun12 in-line blower 3" - squirrel cage not inline
 
* 29jun12 2 3/16"D 1.5" long fastpins for hatch locks
 
* 29jun12 5 stand-up springs for halyard blocks
 
* 29jun12 mast boot
 
* 29jun12 steel bands for exhaust tape
 
* 29jun12 large hose clamp
 
* 29jul12 small gasoline can for dinghy refueling, keep in dock box
 
* 29jul12 two-stroke oil for dinghy outboard
 
* 28jun12 5 halyard blocks for 1/2" line (main, 2 spin, 2 jib) - ordered 5 3" harken blocks 26jun12
 
* 28jun12 2 blocks for 1/2" line (main sheet) - ordered 2 2 1/4" harken blocks 26jun12
 
* 26jun12 snap shackles for dinghy tie-ups
 
* 26jun12 1 small waste bin for head
 
* 26jun12 jib sheets for racing jib: 2x 3/4" line, 40 feet - deferred
 
* 26jun12 boom vang tackle: 352131 (Harken 8:1 Tackle YR-XL), West Marine part no. 7358880 - ordered 15jun12
 
* 26jun12 traveler car: harken T3242B.HL - ordered 15jun12
 
* 22jun12 gasket material for raw water strainer - perko
 
* 22jun12 stainless mesh for raw water strainer - perko approx 6" tall, 1 1/4" in/out pipes
 
* 17jun12 large anchor/rode bag
 
* 17jun12 2 large hose clamps for mast boot - 25 3/4" and 43"
 
* 17jun12 wood dowels - 3/4" diameter and 1 1/8" diameter to plug toerail holes
 
* 17jun12 hooks for line stowage in stbd v-berth bin
 
* 17jun12 3 cheek blocks for 1/2" line (main halyard, main sheet)
 
* 17jun12 two boat hooks
 
* 16jun12 mast boot kit
 
* 16jun12 2 rolls oil blotter
 
* 16jun12 holding tank treatment 4 bottles
 
* 16jun12 large fender to replace uninflatable deflated one
 
* 16jun12 8 1.5" high quality hose clamps for scupper T fittings
 
* 13jun12 binder for manuals - keith has it, will deliver to boat 07apr12
 
* 12jun12 fiberglass insulation for exhaust riser
 
* 12jun12 blower exhaust vent
 
* 12jun12 coolant: ethylene glycol with sodium nitrate/benzoate, 2 gallons
 
* 12jun12 oil: 15W40, 5 quarts
 
* 12jun12 45 degree 1.25" elbow bronze for seawater in
 
* 12jun12 nuts and lockwashers for exhaust riser
 
* 11jun12 two oil hoses
 
* 20may12 1" to 1.25" bronze coupling (via threaded reducer)
 
* 19may12 starter motor - deliver to wally for rebuild 11may12
 
* 19may12 transducer paint
 
* 19may12 replacement screws for prop shaft coupling - will use old ones
 
* 17may12 30 stainless screws oval head phillips #12 3" long
 
* 16may12 traveler end controls
 
* 13may12 stainless cotter pin sets
 
* 13may12 stainless hinge for top cabin/engine step
 
* 13may12 lock washers for engine bracket 3/8"
 
* 13may12 stainless screws for engine mount 3/8", 1.5" long
 
* 13may12 exhaust thru-hull
 
* 13may12 engine seawater in hose
 
* 13may12 bronze fittings for engine seawater in
 
* 13may12 prop paint
 
* 10may12 bottom paint - 3 gallons black - at pavilion
 
* 08may12 exhaust riser for perkins engine - ready to install 01apr12
 
* 08may12 engine bracket and engine mount - ordered by wally foster ??mar12
 
* 22apr12 gojo hand cleaner
 
* 22apr12 bleach
 
* 22apr12 simple green
 
* 22apr12 dust masks
 
* 22apr12 misc electrical parts (wire, breakers, lamp fixtures)
 
* 22apr12 misc hoses and fittings for cockpit scuppers
 
* 22apr12 parts trays for fasteners
 
* ??apr12 hose for large manual pump
 
* 22apr12 fitting for exhaust thru-hull 1-3/4" thread to 2-3/8" barbed/smooth
 
* 01apr12 Y connector for 1-1/8" hose - ordered 01apr12 from jamestown
 
* ??apr12 JABSCO 29290-1000 strum box for 1" hose
 
* 01apr12 whale gusher 10 rebuild kit
 
* 01apr12 1" antisiphon loop (seawater in to engine)
 
* 01apr12 10' engine stop cable plus hardware
 
* 01apr12 6" length of 2" ID hose - on boat
 
* 01apr12 Ultra Safety Systems Ultimate Mini float switch - on boat
 
* 01apr12 bandaids - on boat
 
* 01apr12 large and small wire ties - on boat
 
* 01apr12 large and small nylon wire clamps - on boat
 
* 01apr12 propane regulator - on boat
 
* ??mar12 sponges - package of 6 on boat
 

Latest revision as of 14:49, 31 July 2023

Please add here parts and supplies that are needed for the boat.

needed

  • Hand sanitizer for onboard use
  • 8 wood hangers for the foulies
  • A metric socket set for onboard tasks (e.g. engine work)
  • 2 x safety glasses for the tool kit

from pavilion

in progress

completed