|
|
| (78 intermediate revisions by 5 users not shown) |
| Line 3: |
Line 3: |
| | ==needed== | | ==needed== |
| | | | |
| − | * pen holder for nav station | + | * 3x O-rings for dorade vent covers |
| − | * window gasket - fuller brush company; 12 3/8 x 5 1/4 gasket; 13.5 x 6.5 approx cutout
| + | * 3" diameter dorade vent x2 |
| − | * hooks for fender stowage in port lazarette
| + | * Welding glove for emergency flares |
| − | * 3" blower hose, 15 feet | + | * Eye strap for lee cloth: https://pro.westmarine.com/sea-dog-brass-eye-strap-257618.html or https://www.jamestowndistributors.com/product/product-detail/63333 |
| − | * freshwater fill hose - 1.5" diam, 46" long | + | * 2x MOB AIS units: https://pro.westmarine.com/ocean-signal-rescueme-mob1-ais-dsc-personal-locator-beacon-16749251.html |
| − | * 2 collapsible oars for dinghy, with oar locks
| + | |
| − | * cover for dinghy outboard - 5hp mercury circa 2005 | + | |
| − | * baby stay - 50" pin-to-pin, 1/4" wire
| + | |
| − | * <s>swim ladder</s> fender step
| + | |
| − | * 50' 5/8" spring line (green? not gold/white)
| + | |
| − | * adhesive for lazarette gaskets
| + | |
| − | * non-skid black strips
| + | |
| − | * new lazy jacks, properly sized to main sail | + | |
| − | * 12v vacuum
| + | |
| − | * 12v spotlight
| + | |
| − | * 2 exhaust clamps, 2.5"
| + | |
| − | * 40 #10 1" stainless steel flat head phillips screws (to re-bed forward hatch glass)
| + | |
| − | * white life caulk, 2 tubes
| + | |
| − | * black life caulk, 2 tubes
| + | |
| − | * all-plastic/rubber bucket to replace cracked red bucket
| + | |
| − | * 3 small parts trays (home depot)
| + | |
| − | * traveller sheets - 3/8" 2x20'
| + | |
| − | * 1/8" diameter bolt, 1 1/4" shank
| + | |
| | | | |
| − | * stove | + | * Hand sanitizer for onboard use |
| − | ** propane hose 15' | + | * 8 wood hangers for the foulies |
| − | ** shutoff valve | + | * A metric socket set for onboard tasks (e.g. engine work) |
| − | ** solenoid (pending inspection/refurb of previous) | + | * 2 x safety glasses for the tool kit |
| | | | |
| − | * engine
| + | ==from pavilion== |
| − | ** transmission fluid: ?
| + | |
| | | | |
| − | * rigging
| + | ==in progress== |
| − | ** spinnaker halyard: 1/2" 130' white w/green (was 9/16") - ordered 27jun12, deliver 03jul12
| + | |
| − | ** main halyard: 1/2" 142' solid blue - ordered 27jun12, deliver 03jul12
| + | |
| − | ** jib sheets: 2x 5/8" 75' - (was 3/4") - ordered 27jun12, deliver 03jul12
| + | |
| − | ** main sheet: 1/2" 57' white - ordered 27jun12, deliver 03jul12
| + | |
| − | ** vang line: 3/8" 18' black - ordered 27jun12, deliver 03jul12
| + | |
| − | ** boom vang tube - 3/8" pin, 70" pin-to-pin, C-series - ordered 29jun12, deliver week of 4 july?
| + | |
| − | ** boom vang spring - ordered 29jun12, deliver in 4 weeks
| + | |
| | | | |
| | ==completed== | | ==completed== |
| − |
| |
| − | * 02jul12 set of drill bits
| |
| − | * 02jul12 garden hose
| |
| − | * 02jul12 winch handle pocket to be mounted on mast
| |
| − | * 02jul12 large fender
| |
| − | * 01jul12 freshwater overflow hose - 1.5" diam, 76" long - leftover from bilge hoses
| |
| − | * 01jul12 dust brush and pan
| |
| − | * 01jul12 scissors
| |
| − | * 01jul12 large vise grips
| |
| − | * 29jun12 in-line blower 3" - squirrel cage not inline
| |
| − | * 29jun12 2 3/16"D 1.5" long fastpins for hatch locks
| |
| − | * 29jun12 5 stand-up springs for halyard blocks
| |
| − | * 29jun12 mast boot
| |
| − | * 29jun12 steel bands for exhaust tape
| |
| − | * 29jun12 large hose clamp
| |
| − | * 29jul12 small gasoline can for dinghy refueling, keep in dock box
| |
| − | * 29jul12 two-stroke oil for dinghy outboard
| |
| − | * 28jun12 5 halyard blocks for 1/2" line (main, 2 spin, 2 jib) - ordered 5 3" harken blocks 26jun12
| |
| − | * 28jun12 2 blocks for 1/2" line (main sheet) - ordered 2 2 1/4" harken blocks 26jun12
| |
| − | * 26jun12 snap shackles for dinghy tie-ups
| |
| − | * 26jun12 1 small waste bin for head
| |
| − | * 26jun12 jib sheets for racing jib: 2x 3/4" line, 40 feet - deferred
| |
| − | * 26jun12 boom vang tackle: 352131 (Harken 8:1 Tackle YR-XL), West Marine part no. 7358880 - ordered 15jun12
| |
| − | * 26jun12 traveler car: harken T3242B.HL - ordered 15jun12
| |
| − | * 22jun12 gasket material for raw water strainer - perko
| |
| − | * 22jun12 stainless mesh for raw water strainer - perko approx 6" tall, 1 1/4" in/out pipes
| |
| − | * 17jun12 large anchor/rode bag
| |
| − | * 17jun12 2 large hose clamps for mast boot - 25 3/4" and 43"
| |
| − | * 17jun12 wood dowels - 3/4" diameter and 1 1/8" diameter to plug toerail holes
| |
| − | * 17jun12 hooks for line stowage in stbd v-berth bin
| |
| − | * 17jun12 3 cheek blocks for 1/2" line (main halyard, main sheet)
| |
| − | * 17jun12 two boat hooks
| |
| − | * 16jun12 mast boot kit
| |
| − | * 16jun12 2 rolls oil blotter
| |
| − | * 16jun12 holding tank treatment 4 bottles
| |
| − | * 16jun12 large fender to replace uninflatable deflated one
| |
| − | * 16jun12 8 1.5" high quality hose clamps for scupper T fittings
| |
| − | * 13jun12 binder for manuals - keith has it, will deliver to boat 07apr12
| |
| − | * 12jun12 fiberglass insulation for exhaust riser
| |
| − | * 12jun12 blower exhaust vent
| |
| − | * 12jun12 coolant: ethylene glycol with sodium nitrate/benzoate, 2 gallons
| |
| − | * 12jun12 oil: 15W40, 5 quarts
| |
| − | * 12jun12 45 degree 1.25" elbow bronze for seawater in
| |
| − | * 12jun12 nuts and lockwashers for exhaust riser
| |
| − | * 11jun12 two oil hoses
| |
| − | * 20may12 1" to 1.25" bronze coupling (via threaded reducer)
| |
| − | * 19may12 starter motor - deliver to wally for rebuild 11may12
| |
| − | * 19may12 transducer paint
| |
| − | * 19may12 replacement screws for prop shaft coupling - will use old ones
| |
| − | * 17may12 30 stainless screws oval head phillips #12 3" long
| |
| − | * 16may12 traveler end controls
| |
| − | * 13may12 stainless cotter pin sets
| |
| − | * 13may12 stainless hinge for top cabin/engine step
| |
| − | * 13may12 lock washers for engine bracket 3/8"
| |
| − | * 13may12 stainless screws for engine mount 3/8", 1.5" long
| |
| − | * 13may12 exhaust thru-hull
| |
| − | * 13may12 engine seawater in hose
| |
| − | * 13may12 bronze fittings for engine seawater in
| |
| − | * 13may12 prop paint
| |
| − | * 10may12 bottom paint - 3 gallons black - at pavilion
| |
| − | * 08may12 exhaust riser for perkins engine - ready to install 01apr12
| |
| − | * 08may12 engine bracket and engine mount - ordered by wally foster ??mar12
| |
| − | * 22apr12 gojo hand cleaner
| |
| − | * 22apr12 bleach
| |
| − | * 22apr12 simple green
| |
| − | * 22apr12 dust masks
| |
| − | * 22apr12 misc electrical parts (wire, breakers, lamp fixtures)
| |
| − | * 22apr12 misc hoses and fittings for cockpit scuppers
| |
| − | * 22apr12 parts trays for fasteners
| |
| − | * ??apr12 hose for large manual pump
| |
| − | * 22apr12 fitting for exhaust thru-hull 1-3/4" thread to 2-3/8" barbed/smooth
| |
| − | * 01apr12 Y connector for 1-1/8" hose - ordered 01apr12 from jamestown
| |
| − | * ??apr12 JABSCO 29290-1000 strum box for 1" hose
| |
| − | * 01apr12 whale gusher 10 rebuild kit
| |
| − | * 01apr12 1" antisiphon loop (seawater in to engine)
| |
| − | * 01apr12 10' engine stop cable plus hardware
| |
| − | * 01apr12 6" length of 2" ID hose - on boat
| |
| − | * 01apr12 Ultra Safety Systems Ultimate Mini float switch - on boat
| |
| − | * 01apr12 bandaids - on boat
| |
| − | * 01apr12 large and small wire ties - on boat
| |
| − | * 01apr12 large and small nylon wire clamps - on boat
| |
| − | * 01apr12 propane regulator - on boat
| |
| − | * ??mar12 sponges - package of 6 on boat
| |
