Nav station switches

From MITNA
Revision as of 23:40, 20 September 2007 by ThomS (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Bilge pump 3-way toggle switch

  • UP - automatic mode
    • starts to pump when bilge water reaches a given height,
    • then turns off by itself when a given lower level reached
  • CENTER - OFF (no pumping is attempted)
  • DOWN - pump runs as long as switch is DOWN, even if no water present


Upper horizontal row of 6 toggle switches

SWITCH AMPS CAPTION OBSERVED FUNCTION
1 __-A MAIN powers (12-V) upper 2-6, lower 1-6 switches
2 __-A NAVIG LIGHTS believe lights these that Ted fixed (Aug-Sep07)
3 __-A STEAMING LIGHT blows #3 CB after drawing > 50-A
4 __-A CABIN LIGHTS not observed (Sep07)
5 __-A PRESSURE WATER shows c. 5-A when pump runs
6 __-A BLOWER (blower probably disconnected (Sep07))

Lower horizontal row of 6 switches

SWITCH AMPS CAPTION OBSERVED FUNCTION
1 __-A SUMP PUMP unknown
2 __-A FORE DECK ILLUM blows CB
3 __-A NAVIG INSTR no observed change
4 __-A MASTHEAD LIGHT shows approx2-A, don't know what light goes on
5 __-A RADIO activates fixed VHF power
6 __-A ACCESSORY probably works, but passageway socket disconnected?)


Vertical column of 7 switches

SWITCH AMPS CAPTION OBSERVED FUNCTION
1 __-A no caption not wired up
2 __-A Auto Pilot unknown
3 __-A REFRIGERATION unknown
4 __-A STROBE unknown
5 __-A ANCHOR unknown?
6 __-A PHONE unknown? (note: there's a "phone" shore conn.)
7 __-A RADAR activates RADAR power
8 __-A NAV/COM (Thom's note says "no switch"??)

Right-hand sub-panel (NAV instruments)

TODO: