Replace head thru-hull fittings

From MITNA

Revision as of 15:38, 1 April 2008 by ThomS (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

DISCUSSION:

Observed outside, the hull material around the two thru-hulls for the head appear to need re-glassing. In addition, the head output (effluent) thru-hull was leaking inside the hull in 2007.

Note that the head's raw-water input thru-hull is shared with the sink's output water.

TODO: continue write-up, after uploading pictures of the 2 thru-hulls, etc.

Retrieved from "https://sailing.mit.edu/wiki/index.php?title=Replace_head_thru-hull_fittings&oldid=2265"