Difference between revisions of "Melges 15"
From MITNA
(→Rigging the Melges 15) |
(→Rigging the Melges 15) |
||
| Line 13: | Line 13: | ||
*Remove cover and secure to dock so it can't blow away and sink | *Remove cover and secure to dock so it can't blow away and sink | ||
| + | |||
| + | == Jib == | ||
*Attach black jib hanks to forestay from bottom to top | *Attach black jib hanks to forestay from bottom to top | ||
*Shackle on jib halyard to head of the jib- make sure jib halyard isn't twisted around mast or stays! | *Shackle on jib halyard to head of the jib- make sure jib halyard isn't twisted around mast or stays! | ||
Revision as of 14:58, 25 September 2025
The Melges 15 is a versatile double-handed racing dinghy that was added to the Sailing Pavilion fleet during summer 2025. It has an asymmetric spinnaker but is more stable than a skiff.
Requirements to Sail
- Must have full membership (Normal Sailing Card)
- Must have Helmsman Rating OR Laser: Advanced OR 420: Advanced
Rigging the Melges 15
The boat should be mostly rigged under the cover
Melges 15 Sail Rigging Video: https://youtu.be/BdogJjXHcm0?si=KGIP406h2VDRO0qs&t=889
- Remove cover and secure to dock so it can't blow away and sink
Jib
- Attach black jib hanks to forestay from bottom to top
- Shackle on jib halyard to head of the jib- make sure jib halyard isn't twisted around mast or stays!
- The jib halyard is on the starboard side of the mast- haul up until splice comes out of bottom of the mast
- Hook the spliced loop to the hook on the starboard side of the mast
- Tension the hooked line to pull jib all the way up and to achieve proper rig tension
- Coil and store jib halyard in top pocket of spinnaker bag
- The mainsail can be started on the dock but should only be pulled up when the boat is pointing into the wind, on the water
