Difference between revisions of "Nevermore Return Checklist"
From MITNA
m (Return Checklist moved to Nevermore Return Checklist) |
|||
(27 intermediate revisions by 3 users not shown) | |||
Line 1: | Line 1: | ||
This is the checklist of things to do before leaving the boat. | This is the checklist of things to do before leaving the boat. | ||
− | * | + | * Remove ensign from stern, stow in port shelf of V berth. |
− | * | + | * Remove MITNA burgee, stow in port cabinet of main cabin. |
− | * | + | * Remove radar reflector, stow at bow end of starboard berth. |
− | * | + | * Remove GPS, stow in top drawer of nav station. |
− | * | + | * Stow winch handles in middle drawer of nav station. |
− | * | + | * Stow gaffing hooks in starboard lazarette. |
+ | * Cover binnacle compass (cover stored in top drawer of nav station). | ||
+ | * Ensure that mainsail is tied and covered. | ||
+ | * Ensure that headsail is furled and secured, and jib sheets are tight. | ||
+ | * Ensure that main and spinnaker halyards are tightly secured and not flogging the mast. | ||
+ | * Ensure that centerboard is in 'up' position. | ||
+ | * Ensure that the boom and sailcover will not touch the dodger. | ||
+ | * Close hatches (there are 2) and window ports (there are 9). | ||
+ | * Close head valves (there are 2). | ||
+ | * Tidy up | ||
** wipe kitchen surfaces | ** wipe kitchen surfaces | ||
** sweep/wipe cabin floor | ** sweep/wipe cabin floor | ||
** sweep/wipe cockpit surfaces | ** sweep/wipe cockpit surfaces | ||
** wash/scrub topsides with freshwater | ** wash/scrub topsides with freshwater | ||
− | * | + | * Complete log entry, including: |
** date and time | ** date and time | ||
− | ** engine hours | + | ** engine hours and fuel level |
− | ** name of | + | ** name of person making the entry |
− | ** enumeration of things that were repaired, need to be repaired. | + | ** description of trip, including destination, route, weather |
− | * | + | ** enumeration of things that were repaired, need to be repaired, will soon need to be repaired |
− | * | + | * Stow cockpit cushions on edge in cabin. |
+ | * Ensure that stove valve is off and tank is depressurized. | ||
+ | * Ensure that bilge pump switch is in 'automatic' position (down). | ||
+ | * Set all breakers on nav station to 'off'. | ||
+ | * Set both battery switches to 'off' (pointer to 6 o'clock position). | ||
+ | * Install companionway boards. | ||
+ | * Tighten steering brake with rudder in centered position. | ||
+ | * Deploy the guppy, clamp to backstay | ||
+ | * Lock cabin, starboard lazarette, stern lazarette (locks stored in top drawer of nav station). | ||
+ | |||
+ | |||
+ | {{discuss}} |
Latest revision as of 10:47, 15 August 2011
This is the checklist of things to do before leaving the boat.
- Remove ensign from stern, stow in port shelf of V berth.
- Remove MITNA burgee, stow in port cabinet of main cabin.
- Remove radar reflector, stow at bow end of starboard berth.
- Remove GPS, stow in top drawer of nav station.
- Stow winch handles in middle drawer of nav station.
- Stow gaffing hooks in starboard lazarette.
- Cover binnacle compass (cover stored in top drawer of nav station).
- Ensure that mainsail is tied and covered.
- Ensure that headsail is furled and secured, and jib sheets are tight.
- Ensure that main and spinnaker halyards are tightly secured and not flogging the mast.
- Ensure that centerboard is in 'up' position.
- Ensure that the boom and sailcover will not touch the dodger.
- Close hatches (there are 2) and window ports (there are 9).
- Close head valves (there are 2).
- Tidy up
- wipe kitchen surfaces
- sweep/wipe cabin floor
- sweep/wipe cockpit surfaces
- wash/scrub topsides with freshwater
- Complete log entry, including:
- date and time
- engine hours and fuel level
- name of person making the entry
- description of trip, including destination, route, weather
- enumeration of things that were repaired, need to be repaired, will soon need to be repaired
- Stow cockpit cushions on edge in cabin.
- Ensure that stove valve is off and tank is depressurized.
- Ensure that bilge pump switch is in 'automatic' position (down).
- Set all breakers on nav station to 'off'.
- Set both battery switches to 'off' (pointer to 6 o'clock position).
- Install companionway boards.
- Tighten steering brake with rudder in centered position.
- Deploy the guppy, clamp to backstay
- Lock cabin, starboard lazarette, stern lazarette (locks stored in top drawer of nav station).