Difference between revisions of "Nevermore Return Checklist"
From MITNA
(add compass cover) |
|||
Line 3: | Line 3: | ||
* Hang guppy from stern, about 2 feet into the water. Route cable through steering wheel and clip to backstay. | * Hang guppy from stern, about 2 feet into the water. Route cable through steering wheel and clip to backstay. | ||
* Remove ensign from stern, stow in port shelf of V berth. | * Remove ensign from stern, stow in port shelf of V berth. | ||
− | * Remove MITNA | + | * Remove MITNA burgee, stow in port cabinet of main cabin. |
* Remove radar reflector, stow at bow end of starboard berth. | * Remove radar reflector, stow at bow end of starboard berth. | ||
* Remove GPS, stow in top drawer of nav station. | * Remove GPS, stow in top drawer of nav station. | ||
* Stow winch handles in middle drawer of nav station. | * Stow winch handles in middle drawer of nav station. | ||
+ | * Cover binnacle compass (cover stored where winch handles go.) | ||
+ | * | ||
* Assure that mainsail is tied and covered, headsail is furled and secured. | * Assure that mainsail is tied and covered, headsail is furled and secured. | ||
* Close hatches (there are 2) and window ports (there are 9). | * Close hatches (there are 2) and window ports (there are 9). | ||
Line 20: | Line 22: | ||
** name of person making the entry | ** name of person making the entry | ||
** enumeration of things that were repaired, need to be repaired, will soon need to be repaired | ** enumeration of things that were repaired, need to be repaired, will soon need to be repaired | ||
− | ** description of trip, including destination, route, | + | ** description of trip, including destination, route, weather |
* Set main breaker to 'off' | * Set main breaker to 'off' | ||
* Set both battery switches to 'off' | * Set both battery switches to 'off' |
Revision as of 16:22, 11 April 2008
This is the checklist of things to do before leaving the boat.
- Hang guppy from stern, about 2 feet into the water. Route cable through steering wheel and clip to backstay.
- Remove ensign from stern, stow in port shelf of V berth.
- Remove MITNA burgee, stow in port cabinet of main cabin.
- Remove radar reflector, stow at bow end of starboard berth.
- Remove GPS, stow in top drawer of nav station.
- Stow winch handles in middle drawer of nav station.
- Cover binnacle compass (cover stored where winch handles go.)
- Assure that mainsail is tied and covered, headsail is furled and secured.
- Close hatches (there are 2) and window ports (there are 9).
- Close head valves (there are 2).
- Tidy up
- Wipe kitchen surfaces
- sweep/wipe cabin floor
- sweep/wipe cockpit surfaces
- wash/scrub topsides with freshwater
- Make/Complete log entry, including:
- date and time
- engine hours and fuel level
- name of person making the entry
- enumeration of things that were repaired, need to be repaired, will soon need to be repaired
- description of trip, including destination, route, weather
- Set main breaker to 'off'
- Set both battery switches to 'off'
- Install companionway boards
- Lock cabin, starboard lazarette, stern lazarette.
- Tighten steering brake with rudder in centered position.