Difference between revisions of "Nevermore Return Checklist"
From MITNA
Line 6: | Line 6: | ||
* Remove radar reflector, stow at bow end of starboard berth. | * Remove radar reflector, stow at bow end of starboard berth. | ||
* Remove GPS, stow in top drawer of nav station. | * Remove GPS, stow in top drawer of nav station. | ||
+ | * Stow winch handles in middle drawer of nav station. | ||
* Close hatches (there are 2) and window ports (there are 9). | * Close hatches (there are 2) and window ports (there are 9). | ||
* Close head valves (there are 2). | * Close head valves (there are 2). |
Revision as of 14:53, 9 October 2007
This is the checklist of things to do before leaving the boat.
- Hang guppy from stern, about 2 feet into the water. Route cable through steering wheel and clip to backstay.
- Remove ensign from stern, stow in port shelf of V berth.
- Remove MITNA flag, stow in port cabinet of main cabin.
- Remove radar reflector, stow at bow end of starboard berth.
- Remove GPS, stow in top drawer of nav station.
- Stow winch handles in middle drawer of nav station.
- Close hatches (there are 2) and window ports (there are 9).
- Close head valves (there are 2).
- Tidy up
- Wipe kitchen surfaces
- sweep/wipe cabin floor
- sweep/wipe cockpit surfaces
- wash/scrub topsides with freshwater
- Make/Complete log entry, including:
- date and time
- engine hours and fuel level
- name of person making the entry
- enumeration of things that were repaired, need to be repaired, will soon need to be repaired
- description of trip, including destination, route, weater
- Set main breaker to 'off'
- Set both battery switches to 'off'
- Install companionway boards
- Lock cabin, starboard lazarette, stern lazarette.
- Tighten steering brake with rudder in centered position.