Difference between revisions of "File:Lynx Catboat 1pg Cheat Sheet.tex"

From MITNA
Jump to: navigation, search
 
 
Line 1: Line 1:
−
% -*- mode: latex; mode: orgstruct;  -*-
+
(not used, admin can delete this page.)
−
 
+
−
%  Based on DW-template.tex, version 2011.02.14
+
−
 
+
−
 
+
−
\documentclass[12pt,landscape]{article}
+
−
\usepackage{amsmath}
+
−
\usepackage[top=0.5in,bottom=0.5in,left=0.5in,right=0.5in]{geometry}
+
−
\usepackage{array}
+
−
\usepackage{multicol}
+
−
\usepackage{booktabs}
+
−
\usepackage[pdftex]{graphicx}
+
−
\usepackage[utf8]{inputenc}
+
−
\usepackage{mathptmx}    % package times obsolete, see l2tabuen.pdf
+
−
\usepackage{url}
+
−
\usepackage{enumitem}
+
−
\usepackage{titlesec} % smaller section headers
+
−
\usepackage{setspace}
+
−
 
+
−
\usepackage{microtype} % load /after/ mathptmx or other fonts
+
−
 
+
−
% Handy macros:
+
−
\newenvironment{enumSquished}%
+
−
{
+
−
  \begin{enumerate}[topsep=0pt,partopsep=0pt,itemsep=3pt,parsep=3pt]
+
−
}%
+
−
{\end{enumerate}}
+
−
 
+
−
\newenvironment{itemSquished}%
+
−
{
+
−
  \begin{itemize}[topsep=0pt,partopsep=0pt,itemsep=3pt,parsep=3pt]
+
−
}%
+
−
{\end{itemize}}
+
−
 
+
−
\newcommand{\tnl}{\tabularnewline}
+
−
\newcommand{\ig}[2]{\includegraphics[#1]{../images/#2}}  % insert graphics
+
−
\newcommand{\igw}[2]{\ig{width=#1\textwidth}{#2}}  % insert graphics width
+
−
 
+
−
 
+
−
\setlength{\parskip}{0cm}
+
−
\setlength{\parindent}{0cm}
+
−
 
+
−
\raggedright
+
−
 
+
−
\pagestyle{empty}
+
−
\setcounter{secnumdepth}{0}
+
−
 
+
−
\titlespacing{\section}{0pt}{10pt}{4pt} % %left before after
+
−
 
+
−
 
+
−
\begin{document}
+
−
 
+
−
\setlength{\columnsep}{19pt}
+
−
\setlength{\columnseprule}{0.1pt}
+
−
\begin{multicols*}{3}
+
−
 
+
−
\raggedright
+
−
 
+
−
{\Large \textbf{Lynx Catboat Cheat-Sheet}}
+
−
 
+
−
\vspace{0.3cm}
+
−
 
+
−
{\small Version: 2011.05.30 18:50
+
−
\vspace{0.3cm}
+
−
\begin{spacing}{0.8}
+
−
  Latest version at:
+
−
\url{http://sailing.mit.edu/mediawiki/index.php/Lynx_16_Cheat_Sheet}
+
−
\end{spacing}
+
−
}
+
−
 
+
−
\vspace{-0.1cm}
+
−
 
+
−
\large
+
−
 
+
−
\begin{spacing}{0.9}
+
−
\section{Emergencies}
+
−
\begin{itemSquished}
+
−
\item Keep cool. Collect your thoughts, then take appropriate action.
+
−
\item Call MIT sailing 617 253 4884
+
−
\item Flares, anchor in forward compartment.
+
−
\item Activate light switch next to tiller.
+
−
\item Distress signal: Arms out, wave up \& down slowly.
+
−
\end{itemSquished}
+
−
 
+
−
\section{Too much wind}
+
−
\begin{enumSquished}
+
−
\item Head to wind, let sail out.
+
−
\item Sail back to dock \& reef.
+
−
\item If really crazy, lower red peak halyard.
+
−
\end{enumSquished}
+
−
 
+
−
\section{Excess water in boat}
+
−
\begin{enumSquished}
+
−
\item Clear bailing holes near centerboard.
+
−
\item Get pump from forward compartment.
+
−
\end{enumSquished}
+
−
 
+
−
\section{Forestay broken}
+
−
\begin{enumSquished}
+
−
\item Head downwind.
+
−
\item Lower sail.
+
−
\end{enumSquished}
+
−
 
+
−
% \columnbreak
+
−
\section{Man overboard (MOB)}
+
−
\begin{enumSquished}
+
−
\item Shout ``Man overboard!!''
+
−
\item Stay in boat, don't jump into water unless absolutely necessary.
+
−
\item Skipper:
+
−
  \begin{enumSquished}
+
−
  \item Order one crew: ``watch MOB and point constantly.''
+
−
  \item Sail beam reach for 5-6 boat lengths.
+
−
  \item Tack \& sail broad reach to MOB. Setup for pickup on leeward side.
+
−
  \item Order: ``prepare to pickup.''
+
−
  \item Near MOB, \\luff sail to stop boat.
+
−
  \end{enumSquished}
+
−
\item Pickup MOB on leeward side.
+
−
\end{enumSquished}
+
−
 
+
−
\section{Lost mainsheet}
+
−
Don't gybe!
+
−
 
+
−
\begin{enumSquished}
+
−
\item Lower centerboard.
+
−
\item Turn boat directly into wind to center boom.
+
−
\item Route mainsheet through blocks.
+
−
\item Re-tie stopper knots.
+
−
\end{enumSquished}
+
−
 
+
−
\columnbreak
+
−
\section{Stuck in irons near wall}
+
−
\begin{enumSquished}
+
−
\item Crew: Put out fender.
+
−
\item Crew: Use oar to fend wall \& other boats
+
−
\item Pull in sail \& reorient boat with oar to power up.
+
−
\end{enumSquished}
+
−
 
+
−
\section{Preparing Lynx}
+
−
\begin{enumSquished}
+
−
\item \textbf{Check stopper knot on mainsheet!}
+
−
\item Stow all loose items under bench. Always keep lanes clear.
+
−
\item Lower centerboard.
+
−
\item Remove sail cover, roll up, stow under bench.
+
−
\item Remove tiller-tamers \& boom crutch, stow under bench.
+
−
\item Raise the sail: \\(green = throat, red = peak).
+
−
 
+
−
  \begin{enumSquished}
+
−
  \item Pull both halyards until throat is fully raised.
+
−
  \item Pull peak halyard until sail is smooth.
+
−
  \item Secure halyards in cam cleats. Don't cleat to horns.
+
−
  \item Coil lines \& hook over horns.
+
−
  \end{enumSquished}
+
−
 
+
−
\end{enumSquished}
+
−
 
+
−
\clearpage 
+
−
\raggedbottom
+
−
\section{Launching from mooring}
+
−
\vspace{5pt}
+
−
\textbf{Hold mooring line until skipper says ``release mooring.''}
+
−
\vspace{6pt}
+
−
 
+
−
\begin{enumSquished}
+
−
\item Lower centerboard.
+
−
\item Put mooring line on bow cleat closest to wall.
+
−
\item Crew 1: \textbf{Hold mooring line securely} \& remove from cleat.
+
−
\item Crew 2: Sheet in to power up.
+
−
\item Skipper: Set tiller to sail away from wall.
+
−
\item Crew 1: Walk mooring line back to stern of boat.
+
−
\item Skipper decides: Ready?\\
+
−
 
+
−
  \vspace{6pt}
+
−
  \textbf{Yes:}
+
−
  \begin{enumSquished}
+
−
  \item Skipper: ``Release mooring.''
+
−
  \item Crew 1: Release mooring line.
+
−
  \end{enumSquished}
+
−
         
+
−
  \vspace{6pt}
+
−
  \textbf{No:}
+
−
  \begin{enumSquished}
+
−
  \item Skipper: ``Abort launch!''
+
−
  \item Crew 2: Sheet out to de-power.
+
−
  \item Crew 1:
+
−
    \begin{enumSquished}
+
−
    \item Walk mooring line forward to bow.
+
−
    \item Secure to bow cleat nearest wall.
+
−
    \item Put line through chock.
+
−
    \end{enumSquished}
+
−
  \end{enumSquished}
+
−
\end{enumSquished}
+
−
 
+
−
\section{Launching from dock}
+
−
\begin{enumSquished}
+
−
\item Lower centerboard.
+
−
\item Sheet in to power-up.
+
−
\item Push tiller to dock.
+
−
\item Optional: Push boat to start sailing.
+
−
\item Wedge fender under bench.
+
−
\end{enumSquished}
+
−
 
+
−
 
+
−
\section{Tacking}
+
−
\begin{enumSquished}
+
−
\item To keep speed, push the tiller gently, no more than 3/4 across.
+
−
\item Make sure traveler slides to new position.
+
−
\end{enumSquished}
+
−
 
+
−
\section{Gybing}
+
−
\textbf{Never slam gybe the Lynx! \\Always sheet in first!}
+
−
 
+
−
\vspace{3pt}
+
−
\begin{enumSquished}
+
−
\item Setup a broad reach.
+
−
\item Skipper: ``Prepare to gybe''
+
−
\item Skipper: Slowly begin to turn.
+
−
\item Crew: Pull mainsheet to bring boom towards centerline.
+
−
\item Crew: After sail changes side, quickly let out mainsheet.
+
−
\item Check traveler in new position.
+
−
\end{enumSquished}
+
−
 
+
−
\columnbreak
+
−
\section{Returning to dock}
+
−
 
+
−
\begin{enumSquished}
+
−
\item Put fender out.
+
−
\item Lower centerboard.
+
−
\item Setup to land towards eastern (downtown) end of dock.
+
−
\item Let sail out to slow boat.
+
−
\item Turn sharply into wind.
+
−
\item Crew: Step out with bow line, tie boat to dock.
+
−
\end{enumSquished}
+
−
 
+
−
\section{Returning to mooring}
+
−
 
+
−
\begin{enumSquished}
+
−
\item Lower centerboard.
+
−
\item Put fender out.
+
−
\item Crew: Use oar to fend wall \& boats.
+
−
\item Bow crew: Ready at bow to\\ pickup mooring line.
+
−
\item Skipper: 1-2 boat lengths before mooring, turn sharply into wind, luff sails.
+
−
\item Bow crew:
+
−
  \begin{enumSquished}
+
−
  \item Pickup mooring.
+
−
  \item Secure to horn.
+
−
  \item Put line through chock.
+
−
  \item Tell skipper that boat is secure (or that we missed!)
+
−
  \end{enumSquished}
+
−
\item Crew: Lower both halyards.
+
−
\end{enumSquished}
+
−
 
+
−
\end{spacing}
+
−
 
+
−
\end{multicols*}
+
−
 
+
−
\end{document}
+

Latest revision as of 19:11, 30 May 2011

(not used, admin can delete this page.)

There are no pages that link to this file.

Retrieved from "https://sailing.mit.edu/wiki/index.php?title=File:Lynx_Catboat_1pg_Cheat_Sheet.tex&oldid=3974"