Difference between revisions of "(by person)"

From MITNA
Jump to: navigation, search
(Scott:)
(Scott:)
Line 15: Line 15:
  
 
==Scott:==
 
==Scott:==
* Engine maintenance (change oil/various filters/replace raw water pump) - Scott.  
+
* Engine maintenance (change oil/various filters/replace raw water pump) - Scott. Have all the parts.
 
* Replace nuts on rear quarter fittings - Scott
 
* Replace nuts on rear quarter fittings - Scott
* New blocks for mainsheet - Scott  These are in hand.
+
* New blocks for mainsheet - Scott  These are on the baot.  
 
* New shackles to fasten traveler adjusting blocks to car - Scott.
 
* New shackles to fasten traveler adjusting blocks to car - Scott.
* Inspect running rigging - Scott.
+
* Inspect running rigging - Scott. Done. Need to take a length of rigging to the riggers for work.
* Take halyards/pfds/harnesses/jacklines/foulies/blocks/radios&plugs/puck compass/ditch bag/laptop/iPad to boat. 8-Mar halyards on boat.
+
* Take pfds/harnesses/jacklines/foulies/radios&plugs/puck compass/ditch bag/laptop/iPad to boat. Halyards and blocks on boat.
  
 
==Ted:==
 
==Ted:==

Revision as of 14:28, 10 March 2016

Edit to show progress...

Greg:

  • Repair keel - Greg. Greg has made good progress, Franny will push for him to complete the keel for launch.
  • Paint bottom.

Greg should provide guidance wrt bottom, mast/boom and topsides painting.

Lloyd:

  • Fix engine oil leaks - Lloyd. Lloyd says he’s on this; I’ll keep pushing him. No real Plan B if Lloyd doesn’t move on this; I think we need to pull the engine to do the job right.

Eric:

  • Remove corrosion on mast and boom; repaint - Eric We should work on the boom and the mast. No progress on this yet that I know of.
  • Binnacle light - Eric (can be done after splash)
  • Touch up topsides paint - Eric. Ditto wrt Greg. Our topsides Awlgrip color is Cabernet Burgundy as far as I can tell - Greg has a set of color samples. He might have a few touch-up kits; he said he would order a few last spring for this purpose. Buffing the topsides is part of this.

Scott:

  • Engine maintenance (change oil/various filters/replace raw water pump) - Scott. Have all the parts.
  • Replace nuts on rear quarter fittings - Scott
  • New blocks for mainsheet - Scott These are on the baot.
  • New shackles to fasten traveler adjusting blocks to car - Scott.
  • Inspect running rigging - Scott. Done. Need to take a length of rigging to the riggers for work.
  • Take pfds/harnesses/jacklines/foulies/radios&plugs/puck compass/ditch bag/laptop/iPad to boat. Halyards and blocks on boat.

Ted:

  • Replace damaged NMEA terminator for anemometer on masthead - Ted
  • Inspect steering gear, grease rudderpost - Ted
  • Condition batteries - Ted. I have no idea where this is at.
  • Cetol woodwork - Ted. Scott applied a couple of coats of Cetol to the worst parts last Fall; we should put on a couple of coats more.

Adam:

  • Repair dodger - Adam
  • Get main, #1, #3 and spinnaker from North

Tim:

  • Restitch wheel cover

Other:

  • Take cushions from pav to boat (shortly before launch)
  • Take boom to boat
  • Inflate red dinghy, coat with ArmorAll, move to Waterboat.
  • Clean, buff and Propspeed prop (think there is propspeed at the pav)
  • Replace prop shaft zincs