Difference between revisions of "Winterization"
From MITNA
(→Pre-storage tasks) |
|||
| Line 13: | Line 13: | ||
* Remove all sails and lay out to look for any issues | * Remove all sails and lay out to look for any issues | ||
* Remove all food, dishes, foulies, etc (basically anything that could mildew/rot) | * Remove all food, dishes, foulies, etc (basically anything that could mildew/rot) | ||
| − | |||
* Remove and wash and dry the spare lines, spinnakers, and anything else that’s wet | * Remove and wash and dry the spare lines, spinnakers, and anything else that’s wet | ||
| − | * | + | * Remove the batteries from the boat and put them on a trickle charger in a heated space |
| − | + | ||
| − | + | ||
* Medical kit should be removed to some place that will be above freezing over the winter, to avoid damage to medications. | * Medical kit should be removed to some place that will be above freezing over the winter, to avoid damage to medications. | ||
| − | |||
| − | |||
| − | |||
* Bring the compass to a heated space | * Bring the compass to a heated space | ||
| − | |||
| − | Use black bins (with yellow tops)to store stuff | + | Use black bins (with yellow tops) to store stuff in Bay 1 (or wherever dockmaster says) at the pavilion. Using lidded bins keeps things from running away in the winter |
| + | |||
| + | == Offseason Tasks == | ||
| + | * Use a solution of bleach and water to spray and wipe down all surfaces (including in cockpit lockers) to remove any mold/mildew growth. This should be followed with a spray of fresh water | ||
| + | * All sails that need work need to be coordinated with sailing master and brought to the North Sails Loft at Dions | ||
| + | * Inspect hull and rigging for any repair needs | ||
| + | * Inspect all lines, rig hardware, and spars before storing them for the winter | ||
| + | * Inspect and inventory safety gear, medical kit, etc. | ||
| + | * Inventory spare parts and make list of needed replacements | ||
| + | * Do a PFD inflation test (24 hours, does it lose air) to see if we need to buy more; inspect for damage, etc. | ||
| + | * Coordinate repairs with Dions as early as possible | ||
| + | * Identify all MIT tasks and do-ers as soon as possible | ||
Revision as of 16:33, 24 February 2024
This is a list of things that must be done to make the boat ready for winter:
Pre-delivery for storage tasks
- Fuel tank should be as empty as possible so it can be easily polished
- Pump out the holding tank
- Confirm Dion's expecting you -- need to book with them a few weeks in advance
- Remove all but the necessary equipment, sails, etc. from the boat. It is a lot easier to do this from the dock in Boston than from the dock or on the hard in Salem
Pre-storage tasks
- Remove all cushion covers, fender covers, and other cloth material and bring to the pavilion to get dry cleaned.
- Remove all tethers, PFDs (inflatable and hard-sided), jacklines, and dry
- Remove all tools and inspect for rust
- Remove all sails and lay out to look for any issues
- Remove all food, dishes, foulies, etc (basically anything that could mildew/rot)
- Remove and wash and dry the spare lines, spinnakers, and anything else that’s wet
- Remove the batteries from the boat and put them on a trickle charger in a heated space
- Medical kit should be removed to some place that will be above freezing over the winter, to avoid damage to medications.
- Bring the compass to a heated space
Use black bins (with yellow tops) to store stuff in Bay 1 (or wherever dockmaster says) at the pavilion. Using lidded bins keeps things from running away in the winter
Offseason Tasks
- Use a solution of bleach and water to spray and wipe down all surfaces (including in cockpit lockers) to remove any mold/mildew growth. This should be followed with a spray of fresh water
- All sails that need work need to be coordinated with sailing master and brought to the North Sails Loft at Dions
- Inspect hull and rigging for any repair needs
- Inspect all lines, rig hardware, and spars before storing them for the winter
- Inspect and inventory safety gear, medical kit, etc.
- Inventory spare parts and make list of needed replacements
- Do a PFD inflation test (24 hours, does it lose air) to see if we need to buy more; inspect for damage, etc.
- Coordinate repairs with Dions as early as possible
- Identify all MIT tasks and do-ers as soon as possible
