Difference between revisions of "Fairlead"

From MITNA
Jump to: navigation, search
Line 1: Line 1:
A [[block]], '''padeye''', ring or any other fitting which controls the path of a line on a boat.
+
A '''fairlead''' is a [[block]], padeye, ring or any other device which controls the path of a line on a boat.
  
 
When a line is not running correctly where it is supposed to go, or is snagged or stuck, it is said to be "'''fouled'''".  When a line is running correctly and is not fouled, it is said to be "'''fair'''".
 
When a line is not running correctly where it is supposed to go, or is snagged or stuck, it is said to be "'''fouled'''".  When a line is running correctly and is not fouled, it is said to be "'''fair'''".
Line 5: Line 5:
 
A fairlead is simply a device that "leads" a line "fair".
 
A fairlead is simply a device that "leads" a line "fair".
  
A '''padeye''' is a type of fairleed.  It is any sort of ring or loop that is fastened to the deck or a spar through which a line is run.  Lines should only be run through padeyes at shallow angles.  For sharp angles (especially when heavy loads are required), a [[turning block]] should be used.
+
A '''padeye''' is a type of fairlead.  It is any sort of ring or loop that is fastened to the deck or a spar through which a line is run.  Lines should only be run through padeyes at shallow angles.  For sharp angles (especially when heavy loads are required), a [[block]] should be used.
  
 
[[Category:Sailing Terms]]
 
[[Category:Sailing Terms]]

Revision as of 09:39, 5 October 2007

A fairlead is a block, padeye, ring or any other device which controls the path of a line on a boat.

When a line is not running correctly where it is supposed to go, or is snagged or stuck, it is said to be "fouled". When a line is running correctly and is not fouled, it is said to be "fair".

A fairlead is simply a device that "leads" a line "fair".

A padeye is a type of fairlead. It is any sort of ring or loop that is fastened to the deck or a spar through which a line is run. Lines should only be run through padeyes at shallow angles. For sharp angles (especially when heavy loads are required), a block should be used.