Difference between revisions of "Talk:Nevermore SOPs"
From MITNA
m (Matt said we can see water in holding tank) |
(→Holding Tank) |
||
| Line 9: | Line 9: | ||
# Why should we not open the port in the top of the holding tank? Because it's stinky? Is there a concern about pressure? | # Why should we not open the port in the top of the holding tank? Because it's stinky? Is there a concern about pressure? | ||
--[[User:Ted|Ted]] 11:22, 10 October 2007 (EDT) | --[[User:Ted|Ted]] 11:22, 10 October 2007 (EDT) | ||
| + | # You can visually inspect the holding tank by looking at the side of it - the fluid/solids level shows through the translucent white of the tank. You can also visually inspect through the clear plastic screw-on port. I suggest not removing that port because these ports are often glued on for small holding tanks like this one (not sure if it is glued on nevermore). If it is glued, then we do not want anyone forcing it off. I've seen these glued in order to minimize the possibility of leakage - a much bigger deal on a holding tank than it is on a freshwater tank. | ||
| + | --[[User:mwall|mwall]] 08:31 12oct07 | ||
# Matthew said you can see the water in the holding tank just by looking at it; I haven't tried looking yet | # Matthew said you can see the water in the holding tank just by looking at it; I haven't tried looking yet | ||
--[[User:ThomS|ThomS]] 22:30, 10 October 2007 (EDT) | --[[User:ThomS|ThomS]] 22:30, 10 October 2007 (EDT) | ||
Revision as of 08:31, 12 October 2007
Glowing
I was under the impression that glowing was not necessary in warm weather. The engine or boat manual should be checked. The reason that I mention it is because it really never seemed necessary on Aleida and there were several times that I really wanted a crew member to start up the engine immediately (luffing sails) and they proceded to turn the key to the glow position and count to 10. --Ted 11:14, 10 October 2007 (EDT)
Holding Tank
- How should someone "visually inspect" the holding tank? Is it actually possible to determine the level of the contents of the tank from the outside?
- Why should we not open the port in the top of the holding tank? Because it's stinky? Is there a concern about pressure?
--Ted 11:22, 10 October 2007 (EDT)
- You can visually inspect the holding tank by looking at the side of it - the fluid/solids level shows through the translucent white of the tank. You can also visually inspect through the clear plastic screw-on port. I suggest not removing that port because these ports are often glued on for small holding tanks like this one (not sure if it is glued on nevermore). If it is glued, then we do not want anyone forcing it off. I've seen these glued in order to minimize the possibility of leakage - a much bigger deal on a holding tank than it is on a freshwater tank.
--mwall 08:31 12oct07
- Matthew said you can see the water in the holding tank just by looking at it; I haven't tried looking yet
--ThomS 22:30, 10 October 2007 (EDT)
